Fiddle in-the-white

With all the pieces finished, it's a matter to put them together.  Glueing the plates to the rib assembly (after it's been removed from the form) is fairly straight-forward.  You need to be a little careful to get the overhangs reasonably uniform, and to clean up any glue that gets onto wood that will later be varnished.  Setting the neck is challenging -- lots of angles to get right, nothing flat to measure against, and you can't see it all until you get it where you want it.

But, we trudge onward --

To give the wood a little character, we expose it to UV.  Nowadays, most builders seem to have nice UV boxes, and I want to build one, but right now I just do it the old way -- sunlight.

We're hot these days -- 6th day in a row at 100 degrees F or over, and the skies are a bit thick with smoke from surrounding wildfires.  Here's a shot of the sky a couple evenings ago, with both thunderstorm clouds and smoke.

Of course, if I get even a hint of a thunderstorm, or even wind, I bring the fiddle indoors.  Not interested in that sort of antiquing!

Scroll carving.

The violin scroll is that one recognizable part that everyone knows, except maybe beginning violin-makers such as myself.  What does it look like anyway?  To the general public, they all look the same.  To experienced violin-folk, they're individual.  Guarneri del Gesu's loopy asymmetric scrolls seem charming in a way the rest of us can only envy.  The near perfection of Stradivari or the Amati are something we can strive for.  In the meantime, those of us toiling with the scroll -- which has really no impact on the sound of the fiddle -- cut one, look at it, learn something, and resolve to do better next time.

Here's a side view of my current project, with shadows -- helps to bring out the tool marks, some of which I'll get out of the way, others I'll not see until too late or ignore because they don't bother me.  Right now, there are still plenty that bother me, but I'll look at them another day.

Here's a more conventional view.

Not completely finished, but I can straighten up some of the lines tomorrow.

A non-typical view point for most folks, but for violin makers, you end up looking at the darn thing from all sorts of angles.

So, I'm not completely happy with it, but on the other hand, it will be ok, and now I can concentrate on the neck and fingerboard, which really is important to the player.  Surprisingly, or perhaps not, but the neck is crucial.  It's the one place on the fiddle that the player's hand comes in contact with the fiddle, and has a tremendous influence on the way a player views an instrument.

But visually, more people consider the scroll.  Oh well...

Glueing the top to the ribs

Getting ready to remove the form from the ribs, I clip the blocks with a chisel and mallet.  This gives me a little more wiggle room.

The rib assembly is flexible yet strong.  It only takes a few minutes to get the form out. I clean up the blocks most of the way before glueing the top on.

Hide glue and clamps, we starting to have a box.  Always a fun point in the process.  I spent some time carving the scroll today as well, and it is sitting in the background between the sharpening stone and the caliper.

Now a glass of wine is in order.

Finishing the inside of the top

With the outside pretty much done, it's time to finish the inside of the top.  I use a big-sweep gouge to remove most of the stuff, and this goes fairly fast.  Then onto thumb-planes of decreasing size.  At the end, you're removing fairly thin shavings.  This thumbplane has a sole length of 28-mm, or about an inch and an eighth.

I use a graduation-punch modeled after the one in the Stradivari Museum in Cremona to mark the final thicknesses.  Here, the punch is a 16d nail sharpened on a grinder and the anvil is a carriage bolt with a wing-nut soldered on to allow up and down adjustment.  You simply put the plate in the center, against the anvil, and lower the upper arm to press holes to the proper depth.

As we get thinner, we can use light to look for uneveness.

It's a little-known fact that Stradivari invented the incandescent lightbulb for this very purpose.  At least, that's what I've heard from some violinmakers, but further research has shed some doubt an that attribution.  At the very least, bright light is a good tool on new wood.  The two dark bands here are stripes of denser wood showing up more and more prominently as I proceed.  Wood -- you never know exactly what to expect.

When the inside is finished, the bass-bar material is then fit to the surface.  Once the fit is done, it is glued in place with hide glue.  Here I am using simple, old-fashioned clamps to hold the bass bar in place.

After the glue has set, the bassbar profile can be shaped.

With that, the insides are done.  Next is to shape the edges, then glue the top onto the rib assembly.

Weiser 2012

The National Old-Time Fiddlers Contest has been held during the third full-week in June for many years now.  This year was its 60th anniversary (the same as celebrated by the Queen of England), though I don't know that it's been the third-full week in June all that time.  It has since before I've been going.  Went to my first Weiser in 1995.

Phil Stanley, a Boise bowmaker, and I have been running the repair shop for maybe 10 years now.  We're not sure, and would have to look through our records to figure it out -- clearly not important enough for us to actually do it.  We started out the first couple years running it under Hartz Music's sign, but since then on our own hook.

We set up behind the practice area in the Weiser High School.  Here's the view as you come in the door.

As you can see, visually its a mixture of high-school sports, woodshop, computer shop, and our violin and bow shop.  I have a place here in the foreground to do violin repairs, while Phil sets up at the back bench where he does bow rehairs and repairs.

We sell books, cases, bows, fiddles, some strings and tuners.

Phil tries to sell his handmade bows, and I try to sell my fiddles, both factory and handmade.

We've been there long enough that we have a good time seeing the same faces year after year, as well as seeing what were little kids becoming young adults.